Home Inspection Services

Tuesday, August 27, 2013

Aging in Place - One Source Real Estate Inspection your CA InterNACHI Certified Home Inspector

Aging in Place - http://www.onesourceinspection.com/

by Nick Gromicko
 
 
"Aging in place" is the phenomenon describing senior citizens' ability to live independently in their homes for as long as possible. Those who age in place will not have to move from their present residence in order to secure necessary support services in response to their changing needs.
 
The Baby Boomers
As the baby boomers age, the 60+ population will spike from roughly 45 million in recent years to more than 70 million by 2020. Research shows that baby boomers’ expectations of how they will receive care differ from that of their parents’ generation.  Overwhelmingly, they will seek care in their own homes and will be less likely to move into congregate living settings.
Why do many senior citizens prefer to age in place?
Nursing homes, to many, represent a loss of freedom and a reduced quality of life. Here are a few good reasons why these fears are justified:
  • In 2007, inspectors received 37,150 complaints about conditions in nursing homes. Roughly one-fifth of the complaints verified by federal and state authorities involved the abuse or neglect of patients. Specific problems included infected bedsores, medication mix-ups, poor nutrition, and other forms of neglect.
  • The proportion of nursing homes cited for deficiencies ranged from 76% in Rhode Island to as high as 100% in Alaska, Idaho, Wyoming and Washington, D.C.
  • Many cases have been exposed in which nursing homes billed Medicare and Medicaid for services that were not provided.
  • A significant percentage of nursing homes had deficiencies that caused immediate jeopardy or actual harm to patients.
Aging-in-Place Inspections 
Inspectors may recommend corrections and adaptations to the home to improve maneuverability, accessibility, and safety for elderly occupants. Some such alterations and recommendations for a home are as follows:
    Appliances:
    • microwave oven in wall or on counter;
    • refrigerator and freezer side by side;
    • side-swing or wall oven;
    • controls that  are easy to read;
    • raised washing machine and dryer;
    • front-loading washing machines;
    • raised dishwasher with push-button controls;
    • stoves having electric cooktops with level burners for safely transferring between the burners; front controls and downdraft feature to pull heat away from user; light to indicate when surface is hot; and 
    • replace old stoves with induction cooktops to help prevent burns.
    Bathroom:
    • fold-down seat installed in the shower;
    • adjustable showerheads with 6-foot hose;
    • light in shower stall;
    • wall support, and provision for adjustable and/or varied-height counters and removable base cabinets;
    • contrasting color edge border at countertops;
    • at least one wheelchair-maneuverable bath on main level;
    • bracing in walls around tub, shower, shower seat and toilet for installation of grab bars;
    • if stand-up shower is used in main bath, it is curbless and wide;
    • low bathtub;
    • toilet higher than standard toilet, or height-adjustable;
    • design of the toilet paper holder allows rolls to be changed with one hand;
    • wall-hung sink with knee space and panel to protect user from pipes; and
    • slip-resistant flooring in bathroom and shower.
    Counters:
    • base cabinet with roll-out trays;
    • pull-down shelving;
    • wall support, and provision for adjustable and/or varied-height counters and removable base cabinets;
    • upper wall cabinetry lower than conventional height;
    • accented stripes on edge of countertops to provide visual orientation to the workspace;
    • counter space for dish landing adjacent to or opposite all appliances;
    • glass-front cabinet doors; and
    • open shelving for easy access to frequently used items.
    Exterior:
    • low-maintenance exterior (vinyl, brick, etc); and 
    • low-maintenance shrubs and plants.
    Entry:
    • sensor light at exterior no-step entry focusing on the front-door lock;
    • non-slip flooring in foyer;
    • accessible path of travel to the home;
    • at least one no-step entry with a cover;
    • entry door sidelight or high/low peep hole viewer; sidelight should provide both privacy and safety;
    • doorbell in accessible location; and
    • a surface on which to place packages while opening door.
    Electrical, Lighting, Safety and Security:
    • install new smoke and CO detectors;
    • install automated lighting, an emergency alert system, or a video-monitoring system;
    • easy-to-see and read thermostats;
    • light switches by each entrance to halls and rooms;
    • light receptacles with at least two bulbs in vital places (exits, bathroom);
    • light switches, thermostats and other environmental controls placed in accessible locations no higher than 48 inches from floor;
    • move electrical cords out of the flow of traffic;
    • replace standard light switches with rocker or touch-light switches; and
    • pre-programmed thermostats.
Faucets:
    • thermostatic or anti-scald controls;
    • lever handles or pedal-controlled; and
    • pressure-balanced faucets.
    Flooring:
    • if carpeted, use low-density with firm pad;
    • smooth, non-glare, slip-resistant surfaces, interior and exterior; and
    • color and texture contrast to indicate change in surface levels.
    Hallways:
    • wide;
    • well-lit; and
    • fasten down rugs and floor runners, and remove any that are not necessary.
    Heating, Ventilation and Air Conditioning:
    • install energy-efficient units;
    • HVAC should be designed so filters are easily accessible; and 
    • windows that can be opened for cross-ventilation and fresh air.
    Miscellaneous:
    • 30-inch by 48-inch clear space at appliances, or 60-inch diameter clear space for turns;
    • multi-level work areas to accommodate cooks of different heights;
    • loop handles for easy grip and pull;
    • pull-out spray faucet;
    • levered handles;
    • in multi-story homes, laundry chute or laundry facilities in master bedroom;
    • open under-counter seated work areas; and
    • placement of task lighting in appropriate work areas.
    Overall Floor Plan:
    • main living on a single story, including full bath;
    • 5-foot by 5-foot clear turn space in living area, kitchen, a bedroom and a bathroom; and
    • no steps between rooms on a single level.
    Reduced Maintenance and Convenience Features:
    • easy-to-clean surfaces;
    • built-in recycling system;
    • video phones;
    • central vacuum;
    • built-in pet feeding system; and
    • intercom system.
    Stairways, Lifts and Elevators:
    • adequate hand rails on both sides of stairway;
    • residential elevator or lift; and
    • increased visibility of stairs through contrast strip on top and bottom stairs, and color contrast between treads and risers on stairs with use of lighting.
    Storage:
    • lighting in closets;
    • adjustable closet rods and shelves; and
    • easy-open doors that do not obstruct access.
    Windows:
    • plenty of windows for natural light;
    • low-maintenance exterior and interior finishes;
    • lowered windows, or taller windows with lower sill height; and
    • easy-to-operate hardware.
Advice for those who wish to age in place:
  • Talk with family members about your long-term living preferences. Do you want to downsize to a smaller single-family home, or do you plan to stay put in your traditional family home?
  • Take a look at your finances and retirement funds. With your current savings and assets, will you be able to pay for home maintenance? Consider starting a separate retirement savings account strictly for home maintenance.
  • Remodel your home before your mobility becomes limited. As you age, changes in mobility, hearing, vision and overall health and flexibility will affect how easily you function in your home. Consider making your home “age-friendly” as a phased-in and budgeted home improvement, rather than waiting until you need many modifications at a time due to a health crisis.
  • If you decide before you retire that you want to live in your current home through the remainder of life, consider paying for “big ticket – long life” home projects while you still have a healthy income. Such items may include having the roof assessed or replaced, replacing and upgrading the water heater or cooling unit, completing termite inspections and treatment, having a septic tank inspection and replacement, as needed, and purchasing a riding lawn mower.
  • InterNACHI advocates healthy living, as it plays a vital role in your ability to age in place. Most seniors leave their homes due to functional and mobility limitations that result from medical crises, and an inability to pay for support to stay with them in their home. Effectively managing health risks and maintaining a healthy lifestyle can help you stay strong, age well, and live long at your own home.
In summary, aging in place is a way by which senior citizens can avoid being dependent on others due to declining health and mobility.
 
 
 
 Aging-in-Place flyer:
 






 


 




 

Saturday, August 24, 2013

InterNACHI's Standard Estimated Life Expectancy Chart for Homes - One Source Real Estate Inspection your CA InterNACHI Certified Home Inspector

InterNACHI's Standard Estimated Life Expectancy Chart for Homes - http://www.onesourceinspection.com/


The following chart details the predicted life expectancy of appliances, products, materials, systems and components.  (For homes located in Florida and the surrounding coastal region, please refer to InterNACHI's Florida Estimated Life Expectancy Chart for Homes.)
 
Consumers and inspectors and other professionals advising their clients should note that these life expectancies have been determined through research and testing based on regular recommended maintenance and conditions of normal wear and tear, and not extreme weather (or other) conditions, neglect, over-use or abuse.  Therefore, they should be used as guidelines only, and not relied upon as guarantees or warranties. 
 
***********************************************************************
 
 
Surface preparation and paint quality are the most important determinants of a paint's life expectancy. Ultraviolet (UV) rays via sunshine can shorten life expectancy.  Additionally, conditions of high humidity indoors or outdoors can affect the lifespan of these components, which is why they should be inspected and maintained seasonally.
 
ADHESIVES, CAULK & PAINTS
YEARS
Caulking (interior & exterior)
5 to 10
Construction Glue
20+
Paint (exterior)
7 to 10
Paint (interior)
10 to 15
Roofing Adhesives/Cements
15+
Sealants
8
Stains
3 to 8
 
 
Appliance life expectancy depends to a great extent on the use it receives. Furthermore, consumers often replace appliances long before they become worn out due to changes in styling, technology and consumer preferences.
 
APPLIANCES      
YEARS
Air Conditioner (window)
5 to 7
Compactor (trash)
6
Dehumidifier
8
Dishwasher
9
Disposal (food waste)
12
Dryer Vent  (plastic)
5
Dryer Vent  (steel)
20
Dryer (clothes)
13
Exhaust Fans
10
Freezer   
10 to 20
Gas Oven
10 to 18
Hand Dryer
10 to 12
Humidifier (portable)
8
Microwave Oven
9
Range/Oven Hood
14
Electric Range
13 to 15
Gas Range   
15 to 17
Refrigerator
9 to 13
Swamp Cooler
5 to 15
Washing Machine
5 to 15
Whole-House Vacuum System
20
 
 
Modern kitchens today are larger and more elaborate.  Together with the family room, they now form the “great room.” 
 
CABINETRY & STORAGE   
YEARS
Bathroom Cabinets 
50+ 
Closet Shelves 100+
Entertainment Center/Home Office10
Garage/Laundry Cabinets70+
Kitchen Cabinets50
Medicine Cabinet25+
Modular (stock manufacturing-type)
50 
 
 
Walls and ceilings last the full lifespan of the home.
 
CEILINGS & WALLS
YEARS
Acoustical Tile Ceiling
40+ (older than 25 years may contain asbestos)
Ceramic Tile   
70+
Concrete
75+
Gypsum
75
Wood Paneling
20 to 50
Suspended Ceiling
25+
 
 
Natural stone countertops, which are less expensive than they were just a few years ago, are becoming more popular, and one can expect them to last a lifetime. Cultured marble countertops have a shorter life expectancy, however.
 
COUNTERTOPS
YEARS
Concrete
50
Cultured Marble   
20
Natural Stone
100+
Laminate
20 to 30
Resin
10+
Tile
100+
Wood
100+
 
 
Decks are exposed to a wide range of conditions in different climates, from wind and hail in some areas, to relatively consistent, dry weather in others. See FASTENERS & STEEL section for fasteners.
 
DECKS
YEARS 
Deck Planks
15
Composite
8 to 25
Structural Wood
10 to 30
 
 
Exterior fiberglass, steel and wood doors will last as long as the house, while vinyl and screen doors have a shorter life expectancy. The gaskets/weatherstripping of exterior doors may have to be replaced every 5 to 8 years.
 
DOORS
YEARS
Closet (interior) 
100+
Fiberglass (exterior) 
100+
Fire-Rated Steel (exterior)
100+
French (interior) 
30 to 50
Screen (exterior)
30
Sliding Glass/Patio (exterior)
20 (for roller wheel/track repair/replacement)
Vinyl (exterior)20
Wood (exterior)
100+
Wood (hollow-core interior)
20 to 30
Wood (solid-core interior)
30 to 100+
 
 
Copper-plated wiring, copper-clad aluminum, and bare copper wiring are expected to last a lifetime, whereas electrical accessories and lighting controls, such as dimmer switches, may need to be replaced after 10 years.  GFCIs could last 30 years, but much less if tripped regularly.
 
Remember that faulty, damaged or overloaded electrical circuits or equipment are the leading cause of house fires, so they should be inspected regularly and repaired or updated as needed.
 
ELECTRICAL
YEARS
Accessories
10+
Arc-Fault Circuit Interrupters (AFCIs)
30
Bare Copper
100+
Bulbs (compact fluorescent)
8,000 to 10,000+ hours
Bulbs (halogen)
4,000 to 8,000+ hours
Bulbs (incandescent)
1,000 to 2,000+ hours
Bulbs (LED)
30,000 to 50,000+ hours
Copper-Clad Aluminum
100+
Copper-Plated
100+
Fixtures
40
Ground-Fault Circuit Interrupters (GFCIs)
up to 30
Lighting Controls
30+
Residential Propane Backup Generators
12
Service Panel
60
Solar Panels
20 to 30
Solar System Batteries
3 to 12
Wind Turbine Generators
20
 
 
Floor and roof trusses and laminated strand lumber are durable household components, and engineered trim may last 30 years.
 
ENGINEERED LUMBER
YEARS
Engineered Joists
80+
Laminated Strand Lumber
100+
Laminated Veneer Lumber
80+
Trusses
100+
  


Fastener manufacturers do not give lifespans for their products because they vary too much based on where the fasteners are installed in a home, the materials in which they're installed, and the local climate and environment.  However, inspectors can use the guidelines below to make educated judgments about the materials they inspect.
 
FASTENERS, CONNECTORS & STEEL
YEARS
Adjustable Steel Columns
50+
Fasteners (bright)
25 to 60
Fasteners (copper)
65 to 80+
Fasteners (galvanized)
10+
Fasteners (electro-galvanized)
15 to 45
Fasteners (hot-dipped galvanized)
35 to 60
Fasteners (stainless)
65 to 100+
Steel Beams
200+
Steel Columns100+
Steel Plates
100+
 
 
Flooring life is dependent on maintenance and the amount of foot traffic the floor endures.
 
FLOORING
YEARS
All Wood Floors
100+
Bamboo
100+
Brick Pavers
100+
Carpet
8 to 10
Concrete
50+
Engineered Wood
50+
Exotic Wood
100+
Granite
100+
Laminate
15 to 25
Linoleum
25
Marble
100+
Other Domestic Wood
100+
Slate
100
Terrazzo
75+
Tile
75 to 100
Vinyl
25
 
 
Concrete and poured-block footings and foundations will last a lifetime, assuming they were properly built.  Waterproofing with bituminous coating lasts 10 years, but if it cracks, it is immediately damaged.
 
FOUNDATIONS
YEARS
Baseboard Waterproofing System
50
Bituminous-Coating Waterproofing
10
Concrete Block
100+
Insulated Concrete Forms (ICFs)
100
Post and Pier
20 to 65
Post and Tensioned Slab on Grade
100+
Poured-Concrete Footings and Foundation
100+
Slab on Grade (concrete)
100
Wood Foundation
5 to 40
Permanent Wood Foundation (PWF; treated)
75
 
 
Framing and structural systems have extended longevities; poured-concrete systems, timber frame houses and structural insulated panels will all last a lifetime. 
 
FRAMING
YEARS
Log
80 to 200
Poured-Concrete Systems
100+
Steel
100+
Structural Insulated Panels (SIPs)
100+
Timber Frame
100+
 
 
The quality and frequency of use will affect the longevity of garage doors and openers.
 
GARAGES
YEARS
Garage Doors
20 to 25
Garage Door Openers   
10 to 15
 
 
Home technology systems have diverse life expectancies and may have to be upgraded due to evolution in technology.
 
HOME TECHNOLOGY
YEARS
Built-In Audio
20
Carbon Monoxide Detectors*5
Door Bells
45
Home Automation System
5 to 50
Intercoms
20
Security System
5 to 20
Smoke/Heat Detectors*
less than 10 
Wireless Home Networks
5+
* Batteries should be changed at least annually.
 
 
Thermostats may last 35 years but they are usually replaced before they fail due to technological improvements.
 
HVAC
YEARS
Air Conditioner (central)
7 to 15
Air Exchanger
15
Attic Fan
15 to 25
Boiler
40
Burner
10+
Ceiling Fan
5 to 10
Condenser
8 to 20
Dampers
20+
Dehumidifier
8
Diffusers, Grilles and Registers
25
Ducting
60 to 100
Electric Radiant Heater
40
Evaporator Cooler
15 to 25
Furnace
15 to 25
Gas Fireplace
15 to 25
Heat Exchanger
10 to 15
Heat Pump
10 to 15
Heat-Recovery Ventilator
20
Hot-Water and Steam-Radiant Boiler
40
Humidifier
12
Induction and Fan-Coil Units
10 to 15
Chimney Cap (concrete)
100+
Chimney Cap (metal)
10 to 20
Chimney Cap (mortar)
15
Chimney Flue Tile
40 to 120
Thermostats
35
Ventilator 7
 
 
As long as they are not punctured, cut or burned and are kept dry and away from UV rays, cellulose, fiberglass and foam insulation materials will last a lifetime. This is true regardless of whether they were installed as loose-fill, housewrap or batts/rolls.
 
INSULATION & INFILTRATION BARRIERS
YEARS
Batts/Rolls
100+
Black Paper (felt paper)
15 to 30
Cellulose
100+
Fiberglass
100+
Foamboard
100+
Housewrap
80+
Liquid-Applied Membrane
50
Loose-Fill
100+
Rock Wool
100+
Wrap Tape
80+
 
  
Masonry is one of the most enduring household components. Fireplaces, chimneys and brick veneers can last the lifetime of a home.
 
MASONRY & CONCRETE   
YEARS
Brick
100+
Insulated Concrete Forms (hybrid block)
100+
Concrete Masonry Units (CMUs)
100+
Man-Made Stone
25
Masonry Sealant
2 to 20
Stone
100+
Stucco/EIFS
50+
Veneer
100+
 
 
Custom millwork and stair parts will last a lifetime and are typically only upgraded for aesthetic reasons.
 
MOLDING, MILLWORK & TRIM
YEARS
Attic Stairs (pull-down) 
50
Custom Millwork
100+
Pre-Built Stairs
100+
Stair Parts
100+
Stairs
100+
 
 
The lifetime of any wood product depends heavily on moisture intrusion.
 
PANELS
YEARS
Flooring Underlayment 
25
Hardboard
40
Particleboard
60
Plywood
100
Softwood
30
Oriented Strand Board (OSB)
60 
Wall Panels
100+
 
 
The quality of plumbing fixtures varies dramatically.  The mineral content of water can shorten the life expectancy of water heaters and clog showerheads.  Also, some finishes may require special maintenance with approved cleaning agents per the manufacturers in order to last their expected service lives.
 
PLUMBING, FIXTURES & FAUCETS
YEARS
ABS and PVC Waste Pipe
50 to 80
Accessible/ADA Handles
100+
Acrylic Kitchen Sink
50
Cast-Iron Bathtub
100
Cast-Iron Waste Pipe (above ground)
60
Cast-Iron Waste Pipe (below ground)
50 to 60
Concrete Waste Pipe
100+
Copper Water Lines
70
Enameled Steel Kitchen Sink
5 to 10+
Faucets and Spray Hose
15 to 20
Fiberglass Bathtub and Shower
20
Gas Lines (black steel)
75
Gas Lines (flex)
30
Hose Bibs
20 to 30
Instant (on-demand) Water Heater
10
PEX40
Plastic Water Lines
75
Saunas/Steam Room
15 to 20
Sewer Grinder Pump
10
Shower Enclosure/Module
50
Shower Doors
20
Showerheads
100+ (if not clogged by mineral/other deposits)
Soapstone Kitchen Sink
100+
Sump Pump
7
Toilet Tank Components
5
Toilets, Bidets and Urinals
100+
Vent Fan (ceiling)
5 to 10
Vessel Sink (stone, glass, porcelain, copper)
5 to 20+
Water Heater (conventional)
6 to 12
Water Line (copper)
50
Water Line (plastic)
50
Well Pump
15
Water Softener
20
Whirlpool Tub
20 to 50
 
 
Radon systems have but one moving part:  the radon fan.
 
RADON SYSTEMS
YEARS
Air Exchanger
15
Barometric Backdraft Damper/Fresh-Air Intake
20
Caulking
5 to 10
Labeling
25
Manometer
15
Piping
50+
Radon Fan
5 to 8
 
 
The life of a roof depends on local weather conditions, building and design, material quality, and adequate maintenance.  Hot climates drastically reduce asphalt shingle life.  Roofs in areas that experience severe weather, such as hail, tornadoes and/or hurricanes may also experience a shorter-than-normal lifespan overall or may incur isolated damage that requires repair in order to ensure the service life of the surrounding roofing materials.
 
ROOFING
YEARS
Aluminum Coating
3 to 7
Asphalt Shingles (3-tab)
20
Asphalt (architectural)
30
BUR (built-up roofing)
30
Clay/Concrete
100+
Coal and Tar
30
Copper
70+
EPDM (ethylene propylene diene monomer) Rubber
15 to 25
Fiber Cement
25
Green (vegetation-covered)
5 to 40
Metal
40 to 80
Modified Bitumen
20
Simulated Slate
10 to 35
Slate
60 to 150
TPO
7 to 20
Wood
25
 
 
Outside siding materials typically last a lifetime.  Some exterior components may require protection through appropriate paints or sealants, as well as regular maintenance.  Also, while well-maintained and undamaged flashing can last a long time, it is their connections that tend to fail, so seasonal inspection and maintenance are strongly recommended.
 
SIDINGS, FLASHING & ACCESSORIES
YEARS
Aluminum Siding
25 to 40+
Aluminum Gutters, Downspouts, Soffit and Fascia
20 to 40+
Asbestos Shingle
100
Brick
100+
Cementitious
100+
Copper Downspouts
100
Copper Gutters
50+
Engineered Wood
100+
Fiber Cement
100+
Galvanized Steel Gutters/Downspouts
20
Manufactured Stone
100+
Stone
100+
Stucco/EIFS
50+
Trim
25
Vinyl Siding60
Vinyl Gutters and Downspouts
25+
Wood/Exterior Shutters20
 
 
Site and landscaping elements have life expectancies that vary dramatically. 
 
SITE & LANDSCAPING
YEARS
American Red Clay
100+
Asphalt Driveway
15 to 20
Brick and Concrete Patio
15 to 25
Clay Paving
100+
Concrete Walks
40 to 50
Controllers
15
Gravel Walks
4 to 6
Mulch
1 to 2
Polyvinyl Fencing100+
Sprinkler Heads10 to 14
Underground PVC Piping60+
Valves
20
Wood Chips
1 to 5
Wood Fencing
20
 
 
Swimming pools are comprised of many systems and components, all with varying life expectancies.
 
SWIMMING POOLS
YEARS
Concrete Shell
25+
Cover
7
Diving Board
10
Filter and Pump
10
Interior Finish
10 to 35
Vinyl Liner
10
Pool Water Heater
8
Waterline Tile
15+
 
 
Aluminum windows are expected to last between 15 and 20 years, while wooden windows should last nearly 30 years.
 
WINDOWS
YEARS
Aluminum/Aluminum-Clad
15 to 20
Double-Pane
8 to 20
Skylights
10 to 20
Window Glazing10+
Vinyl Windows
20 to 40
Wood
30+

Note: Life expectancy varies with usage, weather, installation, maintenance and quality of materials.  This list should be used only as a general guideline and not as a guarantee or warranty regarding the performance or life expectancy of any appliance, product, system or component.
 
 


From InterNACHI's Standard Estimated Life Expectancy Chart for Homes - InterNACHI http://www.nachi.org/life-expectancy.htm#ixzz2ct0mkAup